SHAANXI KERGY MECHANICAL EQUIPMENT CO.,LTD

SHAANXI KERGY MECHANICAL EQUIPMENT CO.,LTD

Products Category
Contact Us

Tel: +0086-29-85578975
Fax: +0086-29-85578975
Mobile: +86-18792562982
E-mail: sales@kergyoilfield.com
Add: NO.A23,3/F BUSINESS BUILDING OF MINGDE MATERIALS MALL,BUILDING,HAN GUANG ROAD,YANTA DISTRICT IN XI'AN CITY
MSN: fanxiaoyu_0206@hotmail.com
Skype: fanxiaoyu_0206
QQ: 1478921282
MSN: fanxiaoyu_0206@hotmail.com SKYPE: fanxiaoyu_0206 QQ: 1478921282

Choke Manifold

Choke Manifold
Product name : Choke Manifold
Item :
Details :
 CHOKE MANIFOLD
1. Application
Choke manifold is necessary device to control the well kick successfully and execute the pressure control
technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well’s 
technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control 
blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can 
control the finite pressure from casing by adjusting the choke valve’s opening, so balanced drilling can work
under minimum pressure-difference.
2. Configuration
The choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other
components.
3. Working Principles
When the pressure inside the well rises, opening/closing the choke valves (including manual chokes, hydraulic 
chokes and positive chokes) on the choke manifold can allow the release of the fluid inside the well so as to
 control casing pressure, which can be directly blown out through the gate valve if the casing pressure is quite
high.
4. Pressure Ratings
The kill manifold is available in pressure ratings of 14MPa, 21MPa, 35MPa, 70MPa and 105MPa, and also
can be available upon customer request.
5. Operating Instructions
(1) The working pressure of all components on the choke manifold shall be compatible with that of the BOP
stack used.
(2) The choke manifold shall be installed at the place where the operator can reach it easily. The pressure
test must be performed prior to installation and the seat test pressure shall be equal to the rated working
 pressure.
(3) The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 
degree steel bent pipe shall be used. The bore of the line pipe shall be large enough.
(4) The pressure gauge must be installed.
(5) In winter, the choke manifold can work under a low temperature
Item
Component
Qty
Material
1
Skid Base
1
 
2
Spacer Spool
1
 
3
Gate Valve
12
 
4
Spacer Spool
1
 
5
Six-way Piece
1
4130
6
Blind Flange
5
4130
7
Cross
3
4130
8
Spacer Spool
2
 
9
Hydraulic Choke
2
 
10
Pressure Transmitter
1
 
11
Companion Flange
1
4130
12
Pressure Gauge
1
 
13
Gate Valve
1
 
14
Five-way Piece
1
4130
15
Manual Choke
1